Silver‐Assisted Chemical Etching on Silicon with Polyvinylpyrrolidone‐Mediated Formation of Silver Dendrites

Metal‐assisted chemical etching (MaCE) on silicon (Si)—mediated by polyvinylpyrrolidone (PVP)—is systematically investigated herein. It is found that the morphologies and crystallographic natures of the grown silver (Ag) dendrites can be significantly modulated, with the presence of PVP in the MaCE process leading to the formation of faceted Ag dendrites preferentially along the (111) crystallographic phase, rather than along the (200) phase. Further explorations of the PVP‐mediated effect on Si etching are also revealed. In contrast to the aligned Si nanowires formed by MaCE without PVP addition, only distributed nanopores with sizes of 200 to 400 nm appear on the Si surfaces in the presence of PVP. The origin of surface polishing on Si in the PVP‐mediated MaCE process can be attributed to the distinct transport pathway of holes supplied by the Ag⁺ ions, where the holes are injected directly into the primary Ag seeds, rather than through Ag dendrites, thus leading to the isotropic etching of the Si surface.     

Antioxidant activity and mechanism of the abietane-type diterpene ferruginol

The antioxidant activity of the abietane-type diterpene ferruginol was evaluated by comparison with that of carnosic acid, ( ± )-α-tocopherol and dibutylhydroxytoluene using 2,2-diphenyl-1-picrylhydrazyl, β-carotene bleaching and linoleic acid assays. Ferruginol had the lowest antioxidant activity of this group using the 2,2-diphenyl-1-picrylhydrazyl and β-carotene methods in polar solvent buffer. However, ferruginol exhibited stronger activity than carnosic acid and α-tocopherol for linoleic acid oxidation under non-solvent conditions. Five peaks corresponding to ferruginol derivatives were detected through GC-MS analysis of the reaction between ferruginol and methyl linoleate. The three reaction products were identified as dehydroferruginol, 7β-hydroxyferruginol and sugiol, and the other two peaks were assumed to be 7α-hydroxyferruginol and the quinone methide derivative of ferruginol. The time course of the reaction suggests that the quinone methide was produced early in the reaction and reacted further to produce dehydroferruginol, 7-hydroxyferruginol and sugiol. Thus, we inferred that quinone methide formation was a key step in the antioxidant reaction of ferruginol.     

Coupling Reactions of Alkynyl Indoles and CO2 by Bicyclic Guanidine: Origin of Catalytic Activity?

Density functional theory calculations were used to investigate the three possible modes of activation for the coupling of CO₂ with alkynyl indoles in the presence of a guanidine base. The first of these mechanisms, involving electrophilic activation, was originally proposed by Skrydstrup et al. (Angew. Chem. Int. Ed . 2015 , 54 , 6682). The second mechanism involves the nucleophilic activation of CO₂. Both of these electrophilic and nucleophilic activation processes involve the formation of a guanidine‐CO₂ zwitterion adduct. We have proposed a third mechanism involving the bifunctional activation of the bicyclic guanidine catalyst, allowing for the simultaneous activation of the indole and CO₂ by the catalyst. We demonstrated that a second molecule of catalyst is required to facilitate the final cyclization step. Based on the calculated turnover frequencies, our newly proposed bifunctional activation mechanism is the most plausible pathway for this reaction under these experimental conditions. Furthermore, we have shown that this bifunctional mode of activation is consistent with the experimental results. Thus, this guanidine‐catalyzed reaction favors a specific‐base catalyzed mechanism rather than the CO₂ activation mechanism. We therefore believe that this bifunctional mechanism for the activation of bicyclic guanidine is typical of most CO₂ coupling reactions.     

Nanostructured heterogeneous catalysts for electrochemical reduction of CO2

Electrochemical reduction of CO₂ provides a sustainable solution to address the intermittent renewable electricity storage while recycling CO₂ to produce fuels and chemicals. Highly efficient catalytic materials and reaction systems are required to drive this process economically. This Review highlights the new trends in advancing the electrochemical reduction of CO₂ by developing and designing nanostructured heterogeneous catalysts. The activity, selectivity and reaction mechanism are significantly affected by the nano effects in nanostructured heterogeneous catalysts. In the future, energy efficiency and current density in electrochemical reduction of CO₂ need to be further improved to meet the requirements for practical applications.     

Effect of water on the retention on diol and amide columns in hydrophilic interaction liquid chromatography

The amount of water adsorbed on polar columns plays important role in hydrophilic interaction liquid chromatography. It may strongly differ for the individual types of polar columns used in this separation mode. We measured adsorption isotherms of water on an amide and three diol‐bonded stationary phases that differ in the chemistry of the bonded ligands and properties of the silica gel support. We studied the effects of the adsorbed water on the retention of aromatic carboxylic acids, flavonoids, benzoic acid derivatives, nucleic bases, and nucleosides in aqueous‐acetonitrile mobile phases over the full composition range. The graphs of the retention factors versus the volume fraction of water in mobile phase show “U‐profile” characteristic of a dual hydrophilic interaction–reversed phase retention mechanism. The minimum on the graph that marks the changing retention mechanism depends on the amount of adsorbed water. The linear solvation energy relationship model suggests that the retention in the hydrophilic interaction liquid chromatography mode is controlled mainly by proton–donor interactions in the stationary phase, depending on the column type. Finally, the accuracy of hydrophilic interaction liquid chromatography gradient prediction improves for columns that show a high water adsorption.     

Glass fabrics self-cracking catalytic growth of boron nitride nanotubes

Glass fabrics were used to fabricate boron nitride nanotubes (BNNTs) with a broad diameter range through a combined chemical vapor deposition and self-propagation high-temperature synthesis (CVD-SHS) method at different holding times (0min, 30min, 90min, 180min and 360min). SEM characterization has been employed to investigate the macro and micro structure/morphology changes of the glass fabrics and BNNTs in detail. SEM image analysis has provided direct experimental evidences for the rationality of the optimized self-cracking catalyst VLS growth mechanism, including the transformation situations of the glass fabrics and the BNNTs growth processes respectively. This paper was the further research and compensation for the theory and experiment deficiencies in the new preparation method of BNNTs reported in our previous work. In addition, it is likely that the distinctive self-cracking catalyst VLS growth mechanism could provide a new idea to preparation of other inorganic functional nano-materials using similar one-dimensional raw materials as growth templates and catalysts.     

Theoretical Investigation on Photoionization and Dissociative Photoionization of Toluene

The photoionization and dissociation photoionization of toluene have been studied using quantum chemistry methods.The geometries and frequencies of the reactants,transition states and products have been performed at B3LYP/6-311++G (d,p) level,and single-point energy calculations for all the stationary points were carried out at DFT calculations of the optimized structures with the G3B3 level.The ionization energies of toluene and the appearance energies for major fragment ions,C₇H₇⁺,C₆H₅⁺,C₅H₆⁺,C₅H₅⁺,are determined to be 8.90,11.15 or 11.03,12.72,13.69,16.28 eV,respectively,which are all in good agreement with published experimental data.With the help of available published experimental data and theoretical results,four dissociative photoionization channels have been proposed:C₇H₇⁺+H,C₆H₅⁺+CH₃,C₅H₆⁺+C₂H₂,C₅H₅⁺+C₂H₂+H.Transition structures and intermediates for those isomerization processes are determined in this work.Especially,the structures of C₅H₆⁺ and C₅H₅⁺ produced by dissociative photoionization of toluene have been defined as chain structure in this work with theoretical calculations.     

高比能锂离子电池层状富锂正极材料改性策略研究进展

层状富锂材料具有超过250 mAh∙g⁻¹的高可逆比容量,被认为是下一代高比能锂离子电池最具商业化前景的正极材料之一。然而,层状富锂材料在实际应用之前仍需解决诸多挑战,如高电压氧释放、层状到岩盐相的结构变化、过渡金属离子迁移等结构劣化,并由此带来了较低的初始库伦效率、电压/容量的衰减以及循环寿命的不足。针对以上问题,进行层状富锂材料改性无疑是一种行之有效的方法。本综述全面介绍了层状富锂材料的结构、组分以及电化学性能,在此基础上对材料改性策略进行了系统阐述,详细介绍了体相掺杂、表面包覆、缺陷设计、离子交换和微结构调控等一系列改性策略的现状以及发展趋势,最终提出了高容量和长循环层状富锂材料和高比能锂离子电池的设计思路。     

三核过渡金属配合物在催化反应中的研究进展

多核过渡金属配合物作为一类广泛应用的均相催化剂,其设计灵感往往来自天然酶的多金属活性位点所发挥的重要作用.目前,三核金属配合物作为活化小分子的多金属催化剂受到了广泛的关注.为深入理解三核过渡金属配合物在催化反应中作用特点,对近年报道的代表性三核过渡金属配合物按金属中心进行分类,并对配体环境形成特点及催化应用进行综述.从金属中心出发,讨论了三核过渡金属配合物的几何结构和电子特征;从配体环境出发,总结了关联三个独立的金属位点的配位环境特征;在催化应用方面,重点综述了三核过渡金属配合物在涉及特定化学键活化反应的催化作用机制,最后对三核过渡金属配合物的催化应用前景进行展望.